WhatsApp: +86 18622088833 paul@sinoeaststeel.com
China Leading Steel Manufacturer Since 2008

Steel Piling Pipe Manufacturer

Deep Foundation & Marine Structural Engineering

Heavy-Duty Steel Piling Pipes & Foundation Driven Casing

Sino East Steel is a premier global manufacturer and direct exporter of heavy-wall steel piling pipes conforming to ASTM A252 (Grade 1, 2, and 3), EN 10219, and API 5L. We supply heavy structural LSAW (Longitudinal Submerged Arc Welded) and SSAW (Spiral Submerged Arc Welded) pipe piles ranging from OD 219 mm to 3048 mm (8″ to 120″) with wall thicknesses up to 50 mm (2.0″). Fully equipped with custom driving shoes, conical pile points, splice rings, and multi-layer marine anti-corrosion coatings (3LPE / FBE / Coal Tar Epoxy) with certified EN 10204 3.1 MTC and 100% NDT inspection.

✓ ASTM A252 Gr 1/2/3
✓ OD 219 – 3048 mm (8″ – 120″)
✓ Wall Thickness up to 50 mm
✓ Custom Shoes & Splice Rings
✓ 3LPE / FBE Marine Coating
✓ 100% UT/RT Weld Inspected
ASTM A252 Grade 2 and Grade 3 heavy wall steel piling pipes and foundation driven casing at deep water marine port

Heavy Structural Foundation

Large-Diameter ASTM A252 Gr 2/3 Driven Pile Pipes

Custom fabricated with reinforced driving shoes, 30° beveled ends, and certified 3LPE/FBE anti-corrosion coating for harbor piers & offshore foundation piles.

1. Technical Specification & Standards Matrix

Steel pipe piles act as the foundational load-bearing elements in deep infrastructure, offshore platforms, bridges, and harbor construction. We strictly adhere to international manufacturing tolerances, chemical composition limits, and tensile properties.

Standard & Grade Yield Strength Min. Tensile Strength Min. Elongation Min. (2 in.) Typical Application
ASTM A252 Grade 1 205 MPa (30,000 psi) 345 MPa (50,000 psi) 30% Light foundations & low-stress micro-piles
ASTM A252 Grade 2 240 MPa (35,000 psi) 415 MPa (60,000 psi) 25% Standard building foundations, highway overpasses & bridge piers
ASTM A252 Grade 3 (High-Strength) 310 MPa (45,000 psi) 455 MPa (66,000 psi) 20% Heavy marine berthing, deep-water ports & seismic-rated foundation piles
EN 10219 (S275J2H / S355J2H) 275 – 355 MPa 430 – 680 MPa 22% (-20°C Impact) European standard structural hollow sections & marine tubular piles
API 5L / ISO 3183 (Gr. B – X70) 245 – 485 MPa 415 – 760 MPa 23% High-load offshore wind monopiles & combined sheet-pile walls

2. Manufacturing Methods: LSAW vs. SSAW Piling Pipes

We operate dual-stream heavy fabrication mills providing both Longitudinally Submerged Arc Welded (LSAW/JCOE) and Spiral Submerged Arc Welded (SSAW/HSAW) tubular steel piles to match project-specific geological constraints:

LSAW Pipe Piles (Heavy Wall & High Yield)

  • Diameter Range: OD 406 mm to 1626 mm (16″ to 64″)
  • Wall Thickness: 8.0 mm to 50.0 mm (Up to 2.0″ extra heavy wall)
  • Length: Up to 14.5 meters single length (Field spliceable)
  • Advantage: Exceptional hoop and axial stress resistance, perfect for heavy dynamic hammer driving and deep offshore jackets.

SSAW Pipe Piles (Large Diameter & Continuous Length)

  • Diameter Range: OD 219 mm to 3048 mm (8″ to 120″ ultra-large)
  • Wall Thickness: 6.0 mm to 25.4 mm (1.0″)
  • Length: Up to 38.0 meters continuous without circumferential splice
  • Advantage: High economic efficiency for ultra-large diameter requirements in harbor jetties, cofferdams, and bridge foundations.

3. Value-Added Fabrication & Structural Accessories

To eliminate expensive on-site field modifications, Sino East Steel delivers factory-completed piling solutions ready for immediate driving and drilling:

  • Conical Pile Points & Cast Steel Driving Shoes: Reinforced cast steel cutting shoes welded directly to the pile toe to penetrate dense gravel, boulder layers, and hard bedrock without buckling the pipe end.
  • Precision Beveled Ends & Backing Rings: 30° / 35° bevel angles with tight root face tolerances (+/- 0.5 mm) and integrated internal backup weld rings for fast, zero-defect field splice welding.
  • Certified Circumferential Splicing: Factory-spliced piles reaching lengths in excess of 50 meters, supported by 100% full-penetration radiographic (RT) or ultrasonic (UT) inspection of circumferential weld seams.
  • Clutch Connectors for Combi-Walls: Factory-welded interlocks (Larssen or C9 connectors) for combined pipe-sheet piling walls in deep wharf revetments and retention cofferdams.
  • Anti-Corrosion Marine Coating Systems: Multi-layer Polyethylene (3LPE), Fusion Bonded Epoxy (FBE), Liquid Epoxy, and Glass Flake Epoxy coatings meeting ISO 12944 C5-M (Marine High Durability) and Im2 (Immersion in seawater) standards.

4. Frequently Asked Questions (FAQ)

Q1: What is the primary difference between ASTM A252 Grade 2 and Grade 3 piling pipes?

A: The core difference lies in mechanical yield and tensile thresholds. ASTM A252 Grade 2 requires a minimum yield strength of 240 MPa (35,000 psi) and tensile strength of 415 MPa, making it ideal for standard building and bridge foundations. Grade 3 delivers a significantly higher yield strength of 310 MPa (45,000 psi) and 455 MPa tensile strength, engineered for deep-water marine berthing, high-impact hydraulic hammers, and seismic-resistant structural pilings.

Q2: Can Sino East Steel supply piling pipes with pre-attached driving shoes and internal backing rings?

A: Yes. We provide full in-house custom fabrication including conical points, hardened cast steel cutting shoes, internal alignment backing rings, lifting lugs, and clutch interlocks. All fabrication welding adheres to AWS D1.1 / EN ISO 15614 structural welding codes.

Q3: What non-destructive testing (NDT) is conducted on welded piling pipes?

A: Every production batch undergoes 100% full-length continuous Ultrasonic Testing (UT) along the weld seam, accompanied by Radiographic Testing (RT/X-ray) on pipe ends and circumferential splice seams. We also perform full hydrostatic pressure testing and provide comprehensive EN 10204 3.1 Mill Test Certificates (MTC) and third-party inspection (SGS/BV/DNV) reports.

Q4: What protective coating systems are recommended for marine and splash zone piling applications?

A: For aggressive marine environments (ISO 12944 C5-M / Im2), we recommend external 3-layer polyethylene (3LPE) or fusion bonded epoxy (FBE) for underground and submerged sections, combined with high-build glass flake epoxy or polyurethane coating systems across the tidal splash zone to ensure 30 to 50 years of maintenance-free service life.

Need Heavy Piling Pipes for Your Infrastructure Project?

Send your project bill of quantities (BOQ), diameter, wall thickness, and coating specifications directly to our engineering export desk for immediate factory quotation and production scheduling.

Direct Factory Quote
WhatsApp Quick Quote
Scroll to Top