Deformed Steel Bar Rebar Manufacturer & Supplier in China

Deformed Steel Bar Rebar Manufacturer & Supplier in China

Sino East Steel Group manufactures deformed steel bar (rebar) in Tianjin for reinforced concrete construction. Concrete contractors and rebar suppliers in the Gulf source our deformed bars — from 8 mm to 40 mm — in standard and high-strength grades, with bend testing and mill certificates on every delivery.

Every shipment is manufactured to ASTM A615 / GB 1499.2 / BS 4449, tested in our ISO 9001:2015 certified quality system, and delivered with a complete documentation set including the Mill Test Certificate (MTC) per EN 10204 3.1, commercial invoice, packing list, bill of lading and certificate of origin. Third-party inspection by SGS, BV or TUV can be arranged at the factory or the destination port.

Deformed steel bar from our mill is rolled from continuously cast billets with controlled cooling, which produces the rib pattern required by ASTM A615, BS 4449 and EN 10080. Because we are the rolling mill rather than a trader, grades, diameters and cut-and-bend finishing are confirmed in writing before the billet is charged.

Why Buy Deformed Steel Bar Rebar Direct from a Chinese Factory

Importers and distributors who source deformed steel bar rebar directly from our factory in Tianjin benefit from the complete manufacturing chain under one roof: steel input selection, forming and production, surface treatment, quality testing, packing and export documentation. This integrated model removes trading markups and ensures that the specification approved in the quotation is the specification delivered.

• Rebar rolled in our own mill from continuously cast billets
• ASTM A615 Grade 40/60, BS 4449 B500B, EN 10080 B500, HRB400/HRB500
• Cut-and-bend finishing: hooks, stirrups and U-bars to the project schedule
• Epoxy coating available for aggressive soil and marine environments
• Flexible terms: T/T, L/C, D/A, D/P and O/A for long-term partners
• 18-25 days sea freight to Jebel Ali, Dammam, Jeddah, Hamad Port, Shuwaikh, Sohar

Range and Specifications of Our Deformed Steel Bar Rebar

Rebar programs are structured around the construction schedule: project lots with the bar schedule locked, distributor stock orders in standard diameters, or staged releases for phased concrete works. Our team confirms the grade, diameter and bending schedule before rolling, so every bundle matches the approved documentation.

Standard	ASTM A615 / GB 1499.2 / BS 4449
Available Grades	Grade 40, Grade 60, HRB400, HRB500
Size Range	diameter 6-40 mm, length 6 m / 12 m
Surface / Finish	deformed with longitudinal and transverse ribs
Certification	ISO 9001:2015, MTC per EN 10204 3.1, SGS / BV / TUV inspection available
Packaging	Seaworthy export packing, bundled or palletized per product
MOQ	20-25 metric tons per container, mixed sizes welcomed
Production Time	15-25 days after specification confirmation
Payment	T/T, L/C, D/A, D/P, O/A

Bars are produced with controlled rib geometry for bond with concrete, and tested for yield strength, elongation and bend performance per heat. We supply standard lengths and cut-and-bent bars to your bar bending schedule, with tie wire and accessories available in the same shipment.

Every rebar shipment is tracked from the billet certificate to the destination port, and the export team prepares the documents contractors expect: bill of lading, certificate of origin, MTC and, where applicable, SASO / SABER conformity for Saudi Arabia or Dubai Municipality / ESMA support for the UAE.

How to Choose a Reliable Deformed Steel Bar Rebar Supplier in China

On rebar, verify the grade, yield strength and bend test records against the project specification, and confirm rib geometry meets the standard. For large pours, agree on the delivery schedule and bundle tagging so site teams can place steel without re-measuring.

• Confirm the mill - we open our rolling line to client audits
• Request MTCs from recent rebar shipments with heat numbers
• Verify the grade and diameter for your structural design
• Agree on cut lengths, bend schedule and bundling in writing
• Start with one heat or one project lot before scaling the program

This five-point checklist has helped distributors and contractors across the GCC, Africa and Southeast Asia select the right deformed steel bar rebar partner on their first attempt, avoiding the quality and documentation problems that are common when sourcing through intermediaries.

Global Rebar Supply and Gulf Export Coverage

Deformed bar is the skeleton of Gulf construction: foundations, columns, beams, slabs, retaining walls and precast elements all rely on it. We supply in straight lengths and, where the project calls for it, coordinate bending schedules with fabricators so the rebar arrives ready for placement.

Sino East Steel operates dedicated production lines for deformed steel bar rebar within a 65,000 m2 plant in Daqiuzhuang Industrial Park, Jinghai District, Tianjin. The annual capacity of 500,000 metric tons across all product lines allows the factory to serve distributors, contractors and project companies with stable supply for both container shipments and project-scale tonnages.

Our principal export markets are the Middle East and GCC countries, including the United Arab Emirates, Saudi Arabia, Qatar, Kuwait, Oman and Bahrain, where deformed steel bar rebar is used in construction, infrastructure, energy and industrial projects. We also export to Africa, Southeast Asia, Central Asia and Latin America, supported by shipping programs to the main ports in each region.

Monthly rebar export programs cover the diameters Gulf projects consume: 8 mm to 40 mm in ASTM A615, BS 4449 and EN 10080 grades, with cut-to-length and bend-to-schedule finishing available. Repeat buyers get priority scheduling on the mill, stable pricing and consolidated freight to Gulf ports.

• Monthly rolling production plans reserve capacity for scheduled deliveries
• Container consolidation programs combine deformed steel bar rebar with other product lines
• Dedicated export team with multi-market documentation experience
• Distribution agreements and exclusive-territory arrangements available

Billet-to-Bundle Sourcing: Rolling and Cut-and-Bend In-House

For rebar, the sourcing chain is the billet: bars are rolled from continuously cast billets with controlled cooling, and every heat is sampled for yield, tensile and bend performance before the bars are cut and bundled.

• Billets sourced from integrated steelmakers under long-term agreements
• Rolling capacity reserved for contract and project volumes
• Pre-shipment inspection by SGS, BV or TUV at the factory or destination
• Heat-number traceability from billet to finished bundle
• Quarterly price reviews for contractors and distributors
• Consolidated logistics for mixed-diameter rebar orders

Rebar Quality Control, Certification and Factory Audit

Rebar production runs under the ISO 9001:2015 system, with every heat sampled for yield, tensile and bend performance, and the rib geometry checked against the governing standard. Bundles are strapped, tagged with the heat number and specification, and wrapped for container or bulk loading.

For large GCC concrete programs we host factory audits and witness testing by client representatives and third parties - SGS, Bureau Veritas or TUV - before loading. Documentation can be prepared to satisfy SASO / SABER conformity for Saudi Arabia and Dubai Municipality / ESMA requirements for the UAE.

Sino East Steel Group has supplied deformed steel bar to Gulf construction projects since 2008, rolled in our own mill rather than sourced from third-party suppliers. For new buyers we provide reference lists, bar samples, trial-order guidance and inspection arrangements.

Rebar Technical Support, Samples and After-Sales Service

Our engineers review every rebar inquiry and confirm the grade, diameter, cut length, bending schedule and coating in writing before production. For large projects we can hold rolling capacity for a specific grade and diameter so the entire program ships with consistent heat traceability.

• Written confirmation of grade, diameter, length and bend schedule
• MTC per EN 10204 3.1 with heat numbers on every bundle
• Pre-production samples of rib geometry and bend compliance
• After-sales support for documentation, claims and repeat orders

Export Experience: Deformed Steel Bar Rebar to 50+ Countries

Since 2008, Sino East Steel has supplied deformed steel bar rebar to more than 50 countries, with particular strength in the Middle East, Africa and Southeast Asia. Our export team understands the documentation, packaging and logistics requirements of each destination market: reinforced concrete foundations, slabs, beams, columns, bridges and infrastructure works.

Whether you are a contractor ordering by the project, a distributor building rebar inventory, or an EPC company procuring for a concrete package, you get the same factory service: bar schedule lock, rolling schedule with weekly progress, pre-shipment inspection options and complete export documentation on arrival.

Rebar shipping documents are prepared for the destination customs authority and the buyer, including attested certificates of origin where required. The export team provides the arrival documentation set - invoice, packing list, bill of lading and MTC - before the vessel reaches the Gulf port.

Rebar Quotation, Pricing and Contract Terms

Quotations for rebar are prepared within 24 hours and include the FOB or CIF unit price by grade and diameter, delivery time, packing (strapped bundles, waterproof wrapped), documentation list and payment terms. For contractors we offer tiered pricing by volume and quarterly contract rates.

• FOB Tianjin, CIF, CFR or DDP delivery terms to Gulf ports
• T/T, L/C, D/A, D/P and O/A payment options
• Volume-based pricing tiers for contractors and distributors
• Long-term supply agreements with rolling capacity reservation

All rebar quotations are valid for 15 days and itemize the standard, grade, diameter, cut length, bend schedule, quantity, packing, lead time and shipping terms. Contract volumes are covered by a supply agreement that fixes the grade and traceability requirements for the whole program.

How to Order Deformed Steel Bar Rebar as an Importer

1. Send your rebar standard, grade, diameter, cut lengths and destination port
2. Receive a formal quotation with delivery time and shipping options within 24 hours
3. Confirm the specification in writing; rolling starts after order confirmation
4. Track your shipment with full export documentation until arrival at the destination port

Frequently Asked Questions about Our Deformed Steel Bar Rebar Supply

1. Can your factory supply rebar in project quantities with MTC?

Yes, we supply rebar in project tonnages with Mill Test Certificates per EN 10204 3.1, and third-party inspection by SGS, BV or TUV can be arranged for authority-approved projects.

2. What grades are most commonly exported?

ASTM A615 Grade 60 and GB 1499.2 HRB400 are the most commonly exported grades for GCC construction, in diameters from 6 mm to 40 mm.

3. What is your minimum order quantity?

The MOQ is typically 25 metric tons per size for most products, with mixed-size container loads of 20 or 40 feet welcomed for distributors. Sample orders for project approval can be arranged.

4. What are your payment terms?

We accept T/T, L/C, D/A, D/P and O/A for long-term partners, with payment terms confirmed in the quotation for each order.

5. What is your production and shipping lead time?

Production takes 15-25 days after confirmation of the specification, followed by 18-25 days sea freight to the main GCC ports: Jebel Ali, Dammam, Jeddah, Hamad Port, Shuwaikh and Sohar.

6. Can third-party inspection be arranged?

Yes, inspection by SGS, BV or TUV can be arranged at the factory before loading or at the destination port upon arrival, which is a common requirement for project supply.

7. Do you support OEM and customized requirements?

Yes, we support OEM orders including custom sizes, finishes, packing marks and documentation, subject to MOQ. Custom packaging and labeling to the importer’s specification are available for distributor brands.

8. How do you ensure on-time delivery?

Production capacity is reserved when the order is confirmed, production progress is reported weekly, and shipments are coordinated with freight forwarders in advance. Our on-time delivery record to the Middle East since 2008 is the basis of our long-term relationships with distributors.

9. How do I request a quotation?

Send your requirement to paul@sinoeaststeel.com or message us on WhatsApp at +86 186 2208 8833. Our sales team replies within 24 hours.

10. Which rebar grades and standards do you supply?

We supply per ASTM A615 Grade 60, BS 4449 B500B and GB/T 1499.2 HRB400/HRB500, with yield strength confirmed against the governing standard before production.

11. Can rebar be supplied cut and bent to a bar schedule?

Yes, we coordinate cut-and-bent bars with our fabrication partners per your bar bending schedule, with each bundle tagged for identification on site.

12. What diameters are available?

Common diameters run from 8 mm to 40 mm, in 9 m and 12 m lengths, with smaller diameters on coil for mesh production on request.

Explore Our Deformed Steel Bar Rebar Range

Browse the full deformed steel bar rebar product range supplied by our factory: Deformed Steel Bar Rebar category.

• Deformed Steel Bar Rebar
• ASTM A615 Grade 60 Deformed Bar
• ASTM A615 Grade 40 Deformed Bar
• Rebar Normal Standard Size

Rebar Production and Cut-and-Bend Services for Gulf Contractors

Deformed steel bar from our Tianjin mill is rolled from continuously cast billets with controlled cooling, which produces the distinctive rib pattern required by ASTM A615, BS 4449 and EN 10080. Every heat is sampled for yield, tensile and bend performance before the bars are cut to length and bundled.

What sets our rebar supply apart for Gulf contractors is the finishing capability. Bars can be cut to project lengths, bent to schedule shapes, or delivered straight in standard 12 m lengths. Bundles are strapped, tagged with the heat number and specification, and wrapped for container or bulk loading - ready to go straight from the port to the bending yard.

Common Cut-and-Bend Options

• Straight bars - 6 m to 12 m standard, custom lengths on request
• Bent shapes - hooks, stirrups, and U-bars produced to the project bar schedule
• Grade options - ASTM A615 Grade 40/60, BS 4449 B500B, EN 10080 B500, HRB400/HRB500
• Coating - epoxy coating available for aggressive soil and marine environments

For large GCC projects, we can hold rolling capacity for a specific grade and diameter, so the entire program ships with consistent heat traceability and one documentation set.